ABOP 6, 10, 13-2
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
C-SC_CSSM
2012.08
56/69
Version 1
1. Fit conical sleeve to drill shaft.
2. Fit circlip to conical sleeve.
3. Fit pull-on taper on circlip.
4. Apply pressure and press down pull-on taper.
5. Check that circlip is seated correctly in the drill shaft groove.
NOTE
If the circlip isn't seated correctly in the groove, the gear changeover won't work.
7. Assembly
ABOP 13-2
Tool:
-Conical sleeve and pull-on taper
64131017000
