ABLS 1.6E; ABLS 18 1.6E
7. Assembly
C-SC_CSSM
Version 1.0
2013-07-18
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
17
of
26
Assembling the housing
1. Position the disc (1) correctly on the surface (4) of the housing.
2. Rotate the plunger into position, as shown in the first image.
3. Position the cutting table (2) correctly on the surface (4) of the housing.
4. Using the cylinder head screw (3), secure the cutting table on the housing [65Nm].
Tool:
- 8mm hex key
1
3
2
4
3