ABLS 1.6E; ABLS 18 1.6E
6. Disassembly
C-SC_CSSM
Version 1.0
2013-07-18
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
10
of
26
Disassembling the motor
1. Remove the motor bearing ring (1).
2. Remove the motor (2) from the intermediate bearing (3).
NOTE
The intermediate bearing is only available as a spare part together with pressed-in bearing bush and pressed-in
ball bearing.
3. Remove the pin (1).
4. Remove the grooved ball bearing (2) with an internal puller.
Tool:
- Extractor tool
6 41 14 033 00 0
- Slide hammer
- 5-8mm internal puller
2
3
1
5
4