2
TABLE OF CONTENTS
Additional safety rules for metal cutting saw
2
Assembly and adjustment instruction
3
Installing a new saw blade
4
Laser
6
Cutting depth adjustment
8
Operation 8
Guide ruler
9
Chip removal
10
Replacing carbon brushes
11
Maintenance and servicing
11
Trouble shooting
12
Specifications 12
Parts diagram
13
Replacement parts
14
Manufacturer 18
Intended use
The metal cutting saw is powerful enough to cut steel sheet metal as thick as ¼” (6mm). Metal cutting
saws are designed to rapidly cut lengths or pieces of zinc coated, steel sheet metal and various
metals without heating up either the blade or the material.
WARNING:
To reduce the risk of injury, read the instruction manual.
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
ADDITIONAL SAFETY RULES OF
METAL CUTTING SAW
CAREFULLY READ THE FOLLOWING SAFETY WARNINGS PRIOR TO CONNECTING THE
METAL CUTTING SAW TO POWER.
1. Must keep the safety device in the fixed position, and work according to the order. Never wedging
or binding the safety device below
and must use the safety device.
Before using the metal cutting
saw every time, must ascertain the safety device.
Caution: It probably bends the safety device below when the circular saw fall to the ground, and it
should not be used again til check result is OK after repairing.
2. The blade should be kept clean and sharp. Breakdown and rebound can be lowered to the
minimum limitation with the proper maintenance.
Danger: The hand must depart from the sawing area when operating. Do not touch blade when blade