Page 7
Microscope Assembly:
Insert the 360˚ Rotatable Analyzer
Insert the analyzer (1) facing up into the slot below the objective
lenses (2). The analzyer should click into place.
Adjusting a Sample
Place the sample in the center of the stage (1).
In order to secure the sample, use the holder (3) along with the
attachable mechanical stage (2). The clip (4) will hold the sample
holder in place.
The mechanical stage can be adjusted with the X-Axis adjustment
(5) or the Y-Axis adjustment (6) in order to move the sample to the
desired location.
Working range is 120mm x 80mm.
Connect the Power Supply
Ensure the main switch is in the “O” off position.
Insert one side of the wire (1) into the aviation plug socket (2) and
lock it with the screw.
Insert the other side of the wire (1) to the aviation socket (3).
Insert the power cord (4) into the microscope body power socket
(5). Insert the other end into the power outlet.
Illumination
Turn on the power supply and turn the power switch to “-” on.
Adjust the rheostat control (1) clockwise to brighten the image
and counterclockwise to dim the light.
Using the bulb at a lower voltage will increase the life of the bulb.