CONNECTING THE DMX-SIGNAL-CABLE
1. Please only use high quality cable. We recommend FEIMEX Platin DMX cable. Connect the female
3-pin end of the DMX-cable to the male 3-pin input of the first appliance.
2. Connect the female 3-pin cable end of the first fixture to the male 3-pin input-connector of
the following appliance. Repeat this procedure until you have connected the desired number of
your appliances.
3. No matter how many fixtures you connect in a row, we recommend using FEIMEX Platin DMX
cables. The DMX-signal does not detoriate. An supplemental signal amplifier is not necessary.
DMX IN DMXOUT
DMX IN DMXOUT
DMX IN DMXOUT
3-PIN ZU 5-PIN-TRANSITION-TABLE
Important!
If you use a controller with a 5-pin
DMX-output-connection, you must use a
5- to 3-pol DMX-adapter for DMX IN.enden.
Line
3-Pin Female (Output)
5-Pin Male (Input)
ground/shield
Pin 1
Pin 1
data (-) signal
Pin 2
Pin 2
data (+) signal
Pin 3
Pin 3
not used
not used
not used
not used
(In some older desks, pin 2 is swapped with pin 3.)
DMX IN
DMX OUT
DMX IN
DMX OUT
DMX IN
DMX OUT
DMX IN
DMX OUT
2= DMX-
3= DMX+
1= GND
2
3
1
2
3
1
9
3. INSTALLATION
Summary of Contents for FX500
Page 1: ...User Manual FX500 A IP IPA...
Page 2: ......
