TST
Assembly instructions
LGB
FEIG ELECTRONIC GmbH
Page 18 of 26
TST_LGB_Assembly_instructions_rev5_EN.docx
see chapter "Wiring diagrams for the wiring
board RLGxA
, page 15
Figure 11: Connecting the wiring board
Table 6: Connecting the wiring board
Position
Designation
a
Pin strip for position encoder
b
Terminal block for position encoder
c
Wiring board RLGxA
Connecting the wiring board:
1. Remove the terminal block for the position encoder (
b
) from the controller board (see point
1
).
2. Connect the terminal block (
b
) to the wiring board (
c
) (see point
2
).
3. Connect the light curtain and position encoder to the wiring board.
(see chapter "
Wiring diagrams for the wiring board RLGxA
4. Plug the wiring board (
c
) onto the pin strip (
a
) (see point
4
).
4.
c
a
3.
