Installation Instruction ID RW02 Desktop-Reader
FEIG ELECTRONIC GmbH
Page 13 of 18
E N G L I S H
1.
Safety instructions – please read carefully prior to initiation
•
The device may only be used for the purpose intended by the manufacturer.
•
The operating instructions have to be handed out to every user and kept in an easily
accessible place.
•
Unacceptable changes as well as the use of spare parts and special features which are
not sold or recommended by the manufacturer, may cause fire, electric shocks and in-
juries. Therefore, such measures lead to nonliability of the manufacturer and a lapse of
all warranty claims.
•
The appliance is subject to the manufacturer’s guarantee regulations in the version
valid at the time of purchase. We cannot be held liable for improper or faulty manual or
automatic adjustment of parameters resp. improper use of the appliance.
•
Repair work may only be carried out by the manufacturer.
•
Installation, initiation, maintenance, measuring and adjustment of the appliance should
only be carried out by electricians with a good knowledge of the rules for the prevention
of accidents.
•
Please switch off the power supply before opening the device and make sure that it is
idle.
•
The fact that an operational display goes out does not necessarily mean that the device
is disconnected from the power supply and idle.
•
All labour that is carried out on the appliance as well as its initiation, has to conform to
the national as well as the local regulations. The user has to make sure that the appli-
ance is installed and operated according to the technical rules of the country of installa-
tion as well as other regional regulations. Cable dimensions, protection, earthing, dis-
connection, insulation control and excess current protection should be especially con-
sidered.
•
In case of a forced removal of the reader, the control line (as far as the relay is used) of
the door/gate control may be shorted out and unauthorized opening becomes possible.
