![background image](http://html1.mh-extra.com/html/feig-electronic/obid-i-scan-uhf-id-isc-mru102-poe-led/obid-i-scan-uhf-id-isc-mru102-poe-led_installation-manual_3918418018.webp)
OBID
i-scan
®
UHF
Installation
ID ISC.MRU102-PoE-LED
FEIG ELECTRONIC GmbH
Page 18 of 21
M30119-1e-ID-B.docx
7.3. USA (FCC) and Canada (IC)
The reader ID ISC.MRU102-PoE-LED is identical with the version ID ISC.MRU102-PoE. It just
includes an additional LED Board. Therefore the radio approval applies also for the version ID
ISC.MRU102-PoE-LED.
7.3.1. USA (FCC) and Canada (IC) warning notices
Product name:
ID ISC.MRU102-PoE-LED
Reader name:
ID ISC.MRU102-PoE-LED
FCC ID:
IC:
PJMMRU102
6633A-MRU102
Notice for USA and
Canada
This device complies with Part 15 of the FCC Rules and with
RSS-210 of Industry Canada.
Operation is subject to the following two conditions.
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Unauthorized modifications may void the authority granted under
Federal communications Commission Rules permitting the operation
of this device.
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Le présent appareil est conforme aux CNR d'Industrie Canada appli-
cables aux appareils radio exempts de licence. L'exploitation est auto-
risée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonc-
tionnement.
Warning: Changes or modification made to this equipment not expressly approved by
FEIG ELECTRONIC GmbH may void the FCC authorization to operate this equipment.