OBID i-
scan
®
Installation
ID ISC.PRH110-A
FEIG ELECTRONIC GmbH
P
age 20 of 24
M30500-0de-ID-B.doc
E N G L I S H
4 Operating and Display Elements
4.1 LEDs
The LED functions on the Reader can be software configured.
Table 4-1 shows the standard configuration of the LEDs.
Condition
Description
LED green
"RUN "
-
Indicates Reader is ready to run.
-
Comes on when the Reader is ready to run.
LED red
„LABEL“
-
Comes on when a transponder is detected.
LED orange
„INITIALIZATION“
- Flashes during Reader initialisation after power is turned on.
Table 4-1: Standard configuration of the LEDs
4.2 Buzzer
The Reader’s buzzer can be software configured.
In the standard configuration the buzzer is active when a transponder is detected.
4.3 Button
The button is used to activate the Reader. It is used as an on-button for the Reader. The Reader is
only supplied with power when the button is depressed. When changing the configuration, the
button on the Reader must be held down.
