OBID i-
scan
®
Installation
ID ISC.MRU200i
FEIG ELECTRONIC GmbH
Page 51 of 52
M80401-3de-ID-B.doc
E
N
G
L
I
S
H
6.1 Approval
6.1.1 Europe (CE)
When properly used this radio equipment conforms to the essential requirements of Article 3 and
the other relevant provisions of the R&TTE Directive 1999/5/EC of March 99.
Equipment Classification according to ETSI EN 301 489: Class 2
6.1.2 USA (FCC)
To meet the Part 15 of the FCC Rules the reader ID ISC.MRU200i must operate with the
FEIG Antenna ID.ISC.ANT.U250/250-FCC.
FCC ID: PJMMRU200
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTICE:
Changes or modifications made to this equipment not expressly approved by
FEIG ELECTRONIC GmbH may void the FCC authorization to operate this equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Summary of Contents for OBID i-scan ID ISC.MRU200i
Page 27: ......
