OBID
i-scan
®
UHF
Installation
ID ISC.MRU102-PoE/-USB
FEIG ELECTRONIC GmbH
Page 14 of 21
M20711-0e-ID-B.docx
4.5. USB-Interface on X3 (Host Communication)
There is a USB-socket X3 on board for the connection of the USB-Interface. The pinout is standar-
dized. The data rate is reduced to 12 Mbit (USB full speed). A standard USB-cable can be used.
Figure 5: USB interface for host communication
NOTE:
The length of the USB-cable can be a max. of 5 meter. It isn’t allowed to use longer cables!
The reader must be powered with a external power supply even if it is connected to a “high
powered port”.
