OBID
®
Installation
ID ISC.MU02.02
FEIG ELECTRONIC GmbH
Page 33 of 36
M91002-0de-ID-B.doc
E N G L I S H
If a metallic surrounding cannot be avoided, stable function should at least be ensured by keeping
the distance as great as possible.
The area between the antenna and transponder as well as the area on the other side of the trans-
ponder should also be kept clear of metal parts.
8.6.2. EMC effects on cables
In spite of the internal EMC filters inside the reader, high levels of noise on the supply voltage can
result in impairment of the communication between the reader and transponder.
When installing an ID ISC.MU02.02 into another device, be sure therefore that a clean, noise-free
power supply is used.
9. Radio Approvals
9.1. Europe (CE)
When used according to regulation, this radio equipment conforms with the basic requirements of
Article 3 and the other relevant provisions of the R&TTE Guideline 1999/5/E6 dated March 99.
Equipment Classification gemäß ETSI EN 301 489: Class 2
