background image

IDENTIFICATION 

ID PAD74-U 

 

 

 

INSTALLATION 

Page 2 of 15 

 

NOTE 

© Copyright by 
 
 

FEIG ELECTRONIC GmbH 

 

Industriestraße 1a 

 

D-35781 Weilburg (Germany) 

 

Tel.: +49 6471 3109-0 

 
 

https://www.feig.de/en/

 

 

[email protected]  

 

 

 

With the edition of this document, all previous editions become void. Indications made in this manual may be changed 
without previous notice. 

Copying of this document and giving it to others and the use or communication of the contents thereof are forbidden 
without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the 
grant of a patent or the registration of a utility model or design. 

Composition of the information in this document has been done to the best of our knowledge. 
FEIG ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this manual 
and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, 
errors may not be completely avoided, we are always grateful for your useful tips. 
 

The instructions given in this manual are based on advantageous boundary conditions. FEIG ELECTRONIC GmbH does 
not give any guarantee promise for perfect function in cross environments and does not give any guarantee for the 
functionality of the complete system which incorporates the subject of this document. 
 

FEIG ELECTRONIC GmbH calls explicit attention that devices which are subject of this document are not designed with 
components and testing methods for a level of reliability suitable for use in or in connection with surgical implants or as 
critical components in any life support systems whose failure to perform can reasonably be expected to cause significant 
injury to human health. To avoid damage, injury or death the user or application designer must take reasonably prudent 
steps to protect against system failures. 
 

FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this document and 
makes no representation that they are free of patent infringement. FEIG ELECTRONIC GmbH does not convey any 
license under its patent rights nor the rights of others. 
 

All brand names, trademarks or logos are the property of their respective owners. 

 

 

Summary of Contents for ID PAD74-U
















Reviews: