Identification System OBID
i-scan
Page 4 of 20
FEIG ELECTRONIC GmbH
1. Safety Instructions / Warning
Read before startup !
•
The device may be used only for the purpose intended by the manufacturer.
•
The Installation Instruction should be kept in an accessible location and handed out to every
user and maintenance person.
•
Non-approved modifications and the use of replacement parts and accessories which have not
been purchased or recommended by the manufacturer of the device may cause fires, electrical
shocks and injury. This will furthermore result in exclusion of liability and loss of warranty on
the part of the manufacturer.
•
The warranty conditions in effect at the time of purchase shall be considered valid. No liability
is assumed for inappropriate, improper manual or automatic setting of parameters for a device
or for improper use of a device.
•
Repairs are to be performed only by the manufacturer.
•
Hookup, startup, maintenance, measuring and calibration work on the device must be per-
formed only by electrical specialists who have received the relevant accident prevention train-
ing.
•
When operating devices with probably live wires, respect the valid security regulations.
•
Before opening the device always turn off the supply voltage and use a test instrument to verify
that the device is unpowered.
•
The fact that the indicator lamp is off does not necessarily mean that the device has been dis-
connected from the power supply or that it is without power.
•
All work on the device including installation must be in conformance with national electrical
regulations as well as with local code.
•
The device must be installed and electrically connected in accordance with the recognized
technical regulations in the country where it is being installed and according to other regional
codes..
•
The base plate and the attached heat dissipater may become quite hot during operation.