background image

Use extreme caution when tipping or pulling the mower towards you.

Never use the mower with defective guards, or without safety devices such as baffles and or collection

bins, which are not in place.

Do not change the motor configuration or increase the speed.

For starting, disengage all blades, the gears must be in neutral, the traction control lever must be

released. Set foot well away from the blades.

Before starting the engine or starting the engine, carefully read and understand all instructions.

Do not tilt the mower when starting the machine or turn on the engine, unless the mower needs to be

tilted for starting. In this case, do not tilt it more than absolutely necessary and lift only the part that is

furthest away from the user.

Do not start the machine by standing in front of the ejection

Do not place hands or feet near or under rotating parts. Keep clean the mouth of the grass extractor.

Never take or carry the mower while the machine is running.

Stop the machine and remove the ignition key, disconnect the spark plug from the spark plug:

o

Before cleaning or unclogging the grass extractor.

o

Before checking, cleaning, and working on the mower.

o

After hitting an object. Inspect the mower for damage and repair before re-using the mower.

o

If the mower begins to vibrate abnormally, stop the engine immediately and check according to

previous recommendations.

The controls must be always checked if they are functioning correctly. In case of malfunction, do not

use the tool and bring to a service agent for inspection.

Stop the engine immediately:

o

Every time you leave the tool alone and the working area

o

Before refueling.

When the tool is stopped, park it in a safe place.

Move slowly when moving.

The lawnmower should not be used in slopes and near drop-offs, ditches or embankments; if the tool

must be used in these kinds of emplacements, take an extreme precaution and operate carefully the

tool.

The lawnmower safety systems or features shall not be tampered with or disabled;

The operator should not alter or tamper with any sealed adjustments for the engine speed control.

2.4 MAINTENANCE AND STORAGE

Check and tighten all bolts and screws to ensure that the equipment is in safe operating condition.

Never keep the mower with gasoline in the tank in a building or vapors can cause a bright flame or

spark.

Allow the machine to cool before storing it in an enclosed area.

To reduce the risk of fire, keep the machine clean without grass, without grease, the muffler and the

engine cools, disconnect the battery if necessary and empty the fuel tank

Check the grass catcher frequently, its condition or deterioration.

Replace worn and damaged parts for safety.

If the fuel tank is to be drained, it must be made outdoors.

2.5 SPECIAL SAFETY INSTRUCTIONS

Always use the mower with its pick-up bag and / or deflector in the intended position.

Switch off the engine before emptying the pick-up bag or before changing the cutting height.

While the engine is running, never put your hands or feet under the mower or under the grass ejection

area.

Before mowing, remove all foreign objects from the grass that can be propelled by the machine.

Keep children and pets at a safe distance while using the mower.

Never lift the mower when the engine starts.

Alcohol, drug, as well as illness, fever and fatigue affect your ability to respond. Do not use power tools

in such circumstances.

Never change the rated speed of the motor.

Never lift or carry the tool while the engine is running.

Before starting the engine, release the drawbar.

Before mowing, install the collection bag in its intended position.

04

Summary of Contents for FTDT5096-AC



















Reviews: