Feider FPSI140A Original Instructions Manual Download Page 6

 

• Ambient air temperature range: during operation -10 ° C to +40 ° C; after transport and storage: -20 ° C to +55 ° C; 
• Relative humidity: up to 50% at 40 ° C; up to 90% at 20 ° C; 
• Ambient air, free of quantities of dust, acids, corrosive gases or abnormal corrosive substances, etc. apart from those 

generated by the welding process; 
• Altitude above sea level at 1000 m; 
• Without hydrocarbon mud oil, water vapor and corrosive gas. 
• No vibration and movement 
• Waterproof and with shelter 
• Ventilation more than 300mm from the wall to ensure a cooling air flow and excellent ventilation. 

 

7. Other information about the machine: 
• Cooling method: Fan cooling 
• Handle provided for moving 
• Characteristic of the welding machine: falling characteristic 
• Contents of attachments: Welding cable, welding electrode holder and earth clamp, face mask, welding brush, carton 

box. 

 

Electric shock

——

may lead to death 

 

·

  Set the earth fitting according to applying standard. 

·

  It is forbidden to touch the electric parts and electrode when the skin is naked, wearing wet gloves 

or clothes. 

·

  Make sure you are insulated from the ground and the workshop. 

·

  Make sure you are in safe position. 

Gas

——

may be harmful to health! 

·

Keep your head out of the gas. 

·

When arc welding, air extractor should be used to prevent from breathing gas.   

Arc radiation

——

Harmful to your eye and burn your skin. 

·

Use suitable helmet and light filter, wear protective garment to protect eye and body. 

Fire 

·

Welding spark may cause fire, make sure the welding area no tinder around. 

Noise

——

extreme noise harmful to ear. 

·

Use ear protector or others means to protect ear. 

·

Warn that noise harmful to hearing if looker-on around. 

Malfunction

——

When trouble, count on the professionals 

·

If trouble in installation and operation, please follow this manual instruction to check up. 

·

If fail to fully understand the manual, or fail to solve the problem with the instruction, you should 

contact the suppliers or our service center for professional help. 

 

        CAUTION

 

Summary of Contents for FPSI140A
















Reviews: