ORIGINAL INSTRUCTIONS
12
5. OPERATION
IMPORTANT: Starting shall always be done with the chain brake activated. See on
pages 15-16 how to achieve this.
Before using the chainsaw, inspect the work area. This must be cleared. Remove any
branches, obstacles and other items that may cause damage during cutting.
The unit should always be filled with fuel
Check the level of filling and refill when necessary.
1. Starting the engine
a. Activate the chain brake by pushing it forward.
b. Set the switch to position I.
c. Pull the choke lever. It will close and the throttle will be moved to the starting position
Hold the chainsaw firmly against the ground. Put the chainsaw:
Either on the left side of your body holding the handle firmly with your left
hand. Use your right hand to pull the starter rope
