Technical data
Model
FTDT5170ZT
Engine displacement
170.1 cm³
Vibration value
Uncertainty
Max 11.92m/s²; K=1,5 m/s
2
3. ASSEMBLY
Handle
1. Remove the screws and nuts on the base of the tool
2. Remove the protective padding located on the lower bar.
3. Install the lower bar on the base of the tool and secure it
with the screws and nuts.
4. Unfold the handle carefully so as not to pinch or damage
the control cables.
5. Raise the handles until the lower handle section locks
into the mowing position. If necessary, turn the nut on the handle to lock the handle.
Adjust front wheels
The lawn mower is extremely flexible and maneuverable thanks to the special construction of the
front wheels. These are to be adjusted according to the specific situation as follows:
1. The alignment of the wheel is fixed once the clamping brackets snap into place. If the wheel is
desired in another running direction, lift clamping bracket to release it. Bring wheel into new position
and clamping brackets snaps into place once again.
2. Should the front wheels remain able to move freely, lift the clamping brackets (1) and do not
place them in the opening, but rather set them on the plate beside it.
08
Power
2.5 kW
Engine speed
2900/min
Cutting width
51 cm
Adjustable cutting height
6 positions
Grass collection capacities
75L
weight
3
4
kg
Guaranteed Sound Power Level
98dB
Sound pressure level (LpA)
85,5 dB (A); K
WA
=3 dB (A)
Sound power level (LwA)
96.68dB (A); KWA=1.14 dB
