Charging
The charger is charging the battery pack in charge mode.
Battery pack is full of charge.
Charging is finished and battery pack in the charger.
The temperature of battery is too high or too low, the charger is under protection
status. The charging function can be recovered after the temperature is normal.
Unrecoverable battery malfunction.
4.3 INSERTING AND REMOVING THE BATTERY
WARNING: Before making any adjustments ensure the drill is switched off with the
direction of rotation selector in the center position
1.
Remove the battery: press the battery release latch in and at the same time pull the battery pack off.
2.
To insert the battery, push the battery pack onto the contacts of the tool.
FIG.1
Warning! Always remove the battery from the tool when assembling accessories, making adjustments,
during transport or when the tool is not in use. Remove the battery will prevent accidental starting which
could cause severe personal injury.
NOTE: To avoid serious personal injury, always remove the battery and keep your hands away from the
lock button while transporting the tool.
4.4 INSTALL / REMOVE THE SAW BLADE
The product is provided with a blade, intended to be used for cutting wood. That includes plywood,
panelling, composition board and hardwood.
Use this blade only for cutting wood. Cutting others material can create accidents and injuries.
Others type of blades can be used in this machine, such as blades for cutting drywall, plastics, metals,
etc. You can purchase them in specialized stores. Use only accessories of same trademark and
recommended. Ask advice to your retailer.
a) Turn the quick-release blade clamp (6) anticlockwise and insert the saw blade, then release the quick-release blade
clamp(6). Make sure that the saw blade issecurely fastened. (Fig. 2)
b) Turn the quick-release blade clamp (6) anticlockwise to remove the saw blade.(Fig. 3)
9
