retracting handle and make sure it moves freely and does not touch the blade or any other part, in all
angles and depths of cut.
b) Check the operation of the lower guard spring. If the guard and the spring are not operating
properly, they must be serviced before use.
Lower guard may operate sluggishly due to damaged
parts, gummy deposits, or a build-up of debris.
c) Lower guard may be retracted manually only for
special cuts such as “plunge cuts” and
“compound cuts.” Raise lower guard by retracting handle and as soon as blade enters the
material, the lower guard must be released.
For all other sawing, the lower guard should operate
automatically.
d) Always observe that the lower guard is covering the blade before placing saw down on bench or
floor.
An unprotected, coasting blade will cause the saw to walk backwards, cutting whatever is in its
path. Be aware of the time it takes for the blade to stop after switch is released.
2.5 SPECIFIC SAFETY INSTRUCTIONS FOR CIRCULAR SAWS
a) Do not use any grinding discs.
b) Use only saw blade with diameters corresponding to the label on the saw.
c) When sawing wood or other materials which may create dusts that are hazardous to health, always
connect a suitable, certified vacuum extractor device.
d) Wear a dust mask when sawing wood.
e) Use only the recommended saw blades.
f) Always wear ear protectors.
g) Do not allow the teeth of the saw blade to overheat.
h) Always use the correct saw blade for the material being worked.
i) Use only saw blades with a speed marking which corresponds to or is higher than the speed specified for
the power tool.
j) Saw blades are intended for use on wood and similar material.
k) If the supply cord of this power tool is damaged, it must be replaced by a specially prepared supply cord
available through the service organization.
l) Avoid melting plastic during plastic cutting.
2.6 SYMBOLS
To reduce the risk of injury, the user must read and understand this manual
before using this product.
Wear ear protectors. Exposure to noise can cause hearing loss.
Wear eye protection.
Wear respiratory protection.
Conforms to relevant safety standards
Class II, double isolation
6