Feider Machines FRX600, Instruction Manual

Page: 53 / 121

EN
14.1 Blades

Always use a sharp blade.

If the tool does not cut as well as expected or if it overheats (temperature cut out may trip)
the most common cause is a blunt blade.

It is difficult to see or feel if the blade is blunt. When in doubt use a new blade.

Blades are consumable items.

Beware when changing blades as they can become hot during use. Allow the blade some
time to cool before replacing it.
15 TECHNICAL DATA
Rated voltage 220-240 V
Rated frequency 50 Hz
Rated power 600 W
16 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA 86 dB(A)
Acoustic power level LwA 97 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration):
K = 1.5 m/s²
K=3dB(A)
The vibration total value declared was measured using a standard test method and can be
used to compare one tool with another. The vibration total value declared may be also be
used in a preliminary estimate exposure. The vibration emission during actual use of the
machine tool can differ from the total reported value depending on how the tool is used.
It is necessary to identify security measures to protect the user that are based on an
estimate of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when and the tool is switched off and switched on in
addition to the triggering time.
Cutting wood:ah,W=2.533m/s
2
Cutting metal:ah,M=2.845m/s
2
Cutting concrete:ah=2.639m/s
2
Rotation speed 5500 min
-1
Blade size Ø 89 mm
Max. cutting depth soft wood 2
8
.5 mm
Max. cutting depth tile 8 mm
Max. cutting depth aluminum 3 mm