background image

9. PRODUCT FAILURE                                                                 

WHAT TO DO IF MY MACHINE BREAKS DOWN?

 

If you bought your product in a store:

 

• 

Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, 

the repairer will refuse the machine. 

• 

Go to the store with the complete machine and with the receipt or invoice. 

If you bought your product on a website:

 

• 

Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, 

the repairer will refuse the machine. 

• 

Create a SWAP-Europe service ticket on the site: https://services.swap-europe.com When making the 

request on SWAP-Europe, you must attach the invoice and the photo of the nameplate (serial number). 

Contact the repair station to make sure it is available before dropping off the machine. 

Go to the repair station with the complete machine packed, accompanied by the purchase invoice and the 
station support sheet downloadable after the service request is completed on the SWAP-Europe site 

 

Please keep your original packaging to allow for after-sales service returns or pack your machine with a 
similar cardboard box of the same dimensions.

 

For  any  question  concerning  our  after-sales  service  you  can  make  a  request  on  our  website 
https://services.swap-europe.com

 

Our hotline remains available at +33 (9) 70 75 30 30.

 

 

 

 

 

 

 

 

 

 

12

Summary of Contents for FPV260















Reviews: