ORIGINAL INSTRUCTIONS
·· You can control the handle bar upwards and downwards using the height handle and the
T locking.
6. Tiller Maintenance
As this machine is used in agriculture, the friction, wear and tear and the changes in
workload, parts of the machine may get loose or get worn, the petrol engine may switch off,
the consumption of fuel may increase, all of which will have serious repercussions for the
performance of the machine. To reduce the problems listed above, strictly follow the
scheduled maintenance for longer service life and good technical performance.
A. INTEGRATION.
1. Please, consult the petrol engine instructions manual.
2. A new power tiller must be initially operated with no load under light load conditions and
five hours immediately starting the engine and when all the lubricating oil is hot in the petrol
engine and the crankcase.
B. TECHNICAL MAINTENANCE OF THE POWER TILLER
Types of maintenance (before and later)
1. Listen and observe whether there are abnormal phenomena (strange noises, overheating,
loose screws, etc...)
2. Check the petrol engine and the gearbox for oil spillage.
3. Make sure that oil levels in the engine and gearbox are within the recommended ranges.
4. Keep the machine clean and free form weeds, grease and dirt.
5. Fill in the maintenance table.
1. Level 1 maintenance (after 150 hours of work).
·· Clean the gearbox and replace oil.
·· Check and service the clutch, the gearbox and the reverse.
2. Level 2 maintenance (after 800 hours of work)
·· Clean the gearbox and replace oil.
·· Check and service the clutch, the gearbox and the reverse.
·· Check all the gears for wear and replace when necessary.
·· If the tines or the connection screws are damaged, replace them for new ones.
3. Technical repair (after between 1500 and 2000 hours of work).
·· 1) You must disassemble, clean and check for worn parts. Replace or repair as required.
·· Please, contact a professional for clutch maintenance.
4. Maintenance of the machine and petrol engine. Please check the petrol engine
instructions manual.
C. TECHNICAL MAINTENANCE OF THE TILLER ( THE SIGN * IS SHOWN IN THE
CONTENT TABLE TO INDICATE THAT MAINTENANCE IS REQUIRED).
D. LONG TERM MAINTENANCE OF THE POWER TILLER.
Farm machinery is often stored for long periods of time. To prevent corrosion, the following
steps must be taken:
1. Follow the guidelines for long term storage of a petrol engine.
