SECURE WORKPIECE
. Use clamps or a vice to hold the work when practical. It is safer
than using your hand and it frees both hands to operate the tool.
MAKE SURE
there are no nails or foreign objects in the part of the workpiece to be cut
drilled or sanded.
TO AVOID INJURY
from accidental starting always removes the plug from the electrical
socket before installing or removing a chisel bit.
When using electric hammer chisel only Use bits that are configured with the
correct slots for this chuck.
BEFORE STARTING
the operation, jog the chisel switch to make sure the chisel bit does
not wobble or vibrate
MAKE SURE
the spindle has come to a complete stop before touching the chuck or
attempting to change the chisel bit also beware that the bit will be hot, let it cool down
before changing as it could burn and cause injury.
ALWAYS MAKE SURE THE CHISEL OR DRILL IS FIRMLY SEATED IN THE CHUCK
before starting the job.
SYMBOLS
Read the instructions manual
Class II Product (double insulation)
04
