background image

1. SAFETY INSTRUCTIONS

To reduce the risk of electric shock, injury, and fire when using electrical devices, read and observe the
following basic safety instructions:

This projector has an IP54 degree of protection
Do not place objects within 0.5m of the projector screen
Replace any cracked or broken protective screen
Never stare at the LED beam of your projector
Do not use the projector near traffic lanes,or in any place where the power of the projector could cause
danger
The screen and the projector body may become slightly hot. Do not touch them and never approach
materials or products sensitive to heat
Never place your projector near swimming pools, bodies of water, or in any place accessible to children
It is forbidden to modify or transform the mechanical or electrical construction of the projector
Do not place the projector on a surface subject to vibration
The luminaire must always be used complete with its protective screen
The luminaire is not suitable for accent lighting
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole
luminaire shall be replaced

Correct and safe use of the charger

Never grasp the power plug with wet hands

A device powered by a built-in battery or by a separate battery pack must always be recharged using the
charger specified for the battery in question

Using a charger designed for one type of battery may pose a risk of fire with another type of battery

Never leave the appliance plugged in without supervision

Disconnect the charger from the power supply when not in use

Do not use the charger when it is open

Do not disassemble the charger

Never place anything on the charger, it can cause overheating and damage the charger

Never place the charger near a heat source

Check that the mains voltage matches the indications on the device nameplate

Do not force the cord. Never carry the charger by the cord or pull on it to disconnect it. Keep the cord
away from heat, oil and sharp edges or moving parts. A damaged cord increases the risk of electric
shock

Before use, check the power cable for signs of damage

If the cable deteriorates during use, disconnect the plug from the power supply immediately

Do not use the charger if the cable is damaged or worn out . The battery charger should only be used
indoors.

The external flexible cable or cord of this charger cannot be replaced; if the cord is damaged, the
charger shall be scrapped

Correct and safe use of a lithium-ion battery device

The battery pack of this device was shipped in a low charge state. You must charge the battery pack
before using your electrical device for the first time

Only use the battery charger in its packaging, which matches the Lithium-ion battery, of your electrical
device

The lithium-ion battery can be charged at any time without reducing its life

1

Summary of Contents for FLP30S












Reviews: