Equipment operating rules:
The cutting blade may be tilted to any angle within the range from 0° to 45°. Adjustable rail for
the miter angle on the bench can be rotated to any angle. During the cutting process the pump
can feed water to the cutting blade extending the service life of the cutting blade and reducing
the level of dust.
The movement of the cutting blade along the guide in a straight line ensures the straight
cutting.
Turning on and off (Fig. 5.)
The machine is equipped with a no-voltage
release switch. In case of power supply
interruption or when disconnecting the
plug from the outlet before turning the
machine off, the machine does not turn on
without warning by restoration of power
supply or when the plug is inserted in the
outlet before the portable shutoff
protection device returns to the initial
state, the machine is also turned on with a
switch installed on the machine.
To start the machine press the GREEN button marked with “I”.
To stop the machine press the RED button marked with “O”.
CAUTION!
When the machine is started, the cooling water pump is also started.
Before starting work on the machine, carefully read and study the following section.
• Install the tool in the desired position, then
tighten all the adjusting knobs.
• Loosen the fastening nut (12, Fig. 8).
• Remove the supporting screw (21, Fig. 6).
Fig. 6
Fig. 5
