Pic.3
Installing the handle
4. Place the funnel over the studs in the side of the chipper/shredder and secure it with
flat washer (Ø8, 3pcs), spring washer (Ø8, 3pcs) and locknut (M8, 3pcs). (See
Pic.4
)
Pic.4
Funnel installation
5. Before operating, fill the motor with oil and gas according to the instructions.
This chipper/shredder does not have oil in the motor when shipped. Add oil
before operating the chipper/shredder, or the motor will seize.
Filling the engine oil
Place the machine on a level surface and remove the oil filler cap (
Pic.5
) (5.1).
