3. Hold the handle of the engine part, and move it towards the attachment.
4. Lower the engine part to make the bar
(fig.14A)
go into the two hooks
(fig.14B)
to interlock gears
of two parts
(fig.14C) as shown in fig.15. Please note that during this period, do not grasp the red
lock control lever as shown in fig. 12.
5. If you are connecting snow thrower head, it’s OK for working now.
6. If you are connecting sweeper head, you have to continue the following steps:
a) Remove the direction bar (fig.11 C) from the hook (fig.11 B).
b) Press the direction bar (fig.11 C) to the hole on the sweeper head.
c) Press down the hook (fig.11 A) to fix the direction bar (fig.11 C).
Then your sweeper is workable now.
7. SERVICE & REPAIR - GENERAL
Repair or adjust the sweeper in a safe area, away from traffic and other hazards.
Before adjusting or servicing remove spark plug wire from spark plug.
16