5
b) Keep your face and body away from the
feed intake opening.
c)Do not allow hands or any other part of the
body or clothing inside the feeding chamber,
discharge chute, or near any moving part.
d) Keep proper balance and footing at all times.
Do not overreach. Never stand at a higher
level than the base of the machine when
feeding material into it.
e) Always stand clear of the discharge zone
when operating this machine.
f) When feeding material into the machine be
extremely careful that pieces of metal, rocks,
bottles, cans or other foreign objects are not
included.
g) If the cutting mechanism strikes any foreign
objects or if the machine should start making
any unusual noise or vibration, immediately
shut off the power source and allow the
machine to stop. Disconnect the machine from
the supply and take the following steps before
restarting and operating the machine:
inspect for damage;
replace or repair any damaged parts;
Check for and tighten any loose parts.
h) Do not allow processed material to build up
in the discharge zone; this may prevent proper
discharge and can result in kickback of
material through the intake opening.
