use chipped, cracked or otherwise damaged wheels. The grinding wheel continues to
rotate after the tool is stopped.
-
Use of mini-drill:
o
Hearing protection must be applied when using the drill.
-
Use of mini-grinder
o
Make sure that the dimensions of the grinding wheel are compatible with the grinder
o
Check grinding wheel before use, do not use chipped, cracked or otherwise
damaged wheels
o
Ensure that the grinding wheels and grinding wheels are mounted in accordance
with the manufacturer's instructions
o
Ensure that the abrasive tool is properly assembled and tightened before using the
tool; Run the tool for 30 seconds in a safe position, stop immediately if there is a high
vibration or if other defects are detected. If this is the case, check the tool to
determine the cause of the fault
o
Check that the workpiece is maintained correctly
o
Ensure that sparks caused by use do not cause no danger, such as not touching
people or igniting flammable substances
o
If it becomes necessary to clean the dust, first disconnect the tool from the mains (do
not use metal objects) and avoid damaging internal parts.
o
Always use safety glasses and hearing protectors. Other personal protections such
as dust masks, gloves, helmets and aprons may be used if necessary. If in doubt,
put the protective equipment.
o
Ensure that the ventilation openings are kept clean when the tool is used in dusty
conditions.
o
The grinding wheel continues to rotate after the tool has stopped
Remaining hazards
The machine has been built using modern technology in accordance with recognized
safety rules. Some remaining hazards, however, may still exist.
Long hair and loose clothing can be hazardous when the work piece is rotating. Wear
personal protective gear such as a hair net and tight fitting work clothes.
Saw dust and wood chips can be hazardous. Wear personal protective gear such as safety
goggles and a dust mask.
The use of incorrect or damaged mains cables can lead to injuries caused by electricity.
Even when all safety measures are taken, some remaining hazards which are not yet evident
may still be present.
Remaining hazards can be minimized by following the instructions in Safety Precautions,
Proper Use and in the entire operating manual.
Do not force the machine unnecessarily: excessive cutting pressure may lead to rapid
deterioration of the blade and a decrease in performance in terms of finish and cutting
precision.
Avoid accidental starts: do not press the start button while inserting the plug into the socket.
Keep this safety information in a safe place.
Summary of Contents for F405SC3F
Page 6: ...2 YOUR PRODUCT a Description...
Page 7: ......
