mimclip.mimsafe.com
8
ST
EP
Post & Rail Kit - 80321
Edition 2020-12
200 mm
8 inch
SAFE ARE
A
WARNING
When rail is released the distance between
rail and ground should be minimum 200 mm.
If distance between ground and rail is less,
then place an object which will prevent
the rail to fall into the
SAFE AREA
WARNING
To procect the fence mechanism when
released, put a dampening material
between the safe area and the released
part of the fence.
D
2X
The advantages of the Post & Rail Kit
1. It has been produced with safety being the first and
foremost important factor.
2. Reduces the possibility of rotational falls.
3. FEI approved number FEI10SWE.
4. Controlled movement of fence during release.
5. Reconstruction time is less than 30 seconds.
6. The parts are made of powder coated steel and can be left
outside, no maintenance is required.
7. The very highest quality of product from Sweden.
The advantages of the MIMclip
The MIMclip (F18C)
breaks on impact.
The flag is bent when the clip is exposed
to fatigue. In both cases the clip must be
replaced. The top section is connected
to the post with a hinge that makes the
fence easy to reconstruct. This saves
time, guarantees fair and correct judging
for riders and contributes to the overall
safety of the sport.
The flag is bent when fatigued.
Summary of Contents for mimsafe 80326
