F E I B A O F - 9 F P A N T H E R
19
19
19
19
40. Apply a nice even layer of hysol to the top of the fuse. Thread the elevator
servo wires in and through the holes in the bulkheads.
Figure 40
41. Push the stab and rudder assembly into place and tighten up the two bolts in
the side of the fuse.
Figure 41
42. Wipe up any excess hysol that oozes out with a rag soaked in mineral spirits,
and set aside to dry. Carefully check squareness and alignment while drying.
Figure 42
