20
10. Trouble Shooting
If there is any problem when using the unit, please try following
ways to inspect and solve. Please contact us if you still could not
solve it or have other problems.
● Without image display
Fault cause and solve
◆
Video cable off or connect
incorrectly
Check the quality of the cable, make
sure the correct input interface
◆
Without video signal input
Check the signal source and output
interface connect is correct or not
◆
Monitor is not be powered on
Check whether the power is connected,
put the power switch to “on” position
◆
Supply voltage instability
The power adapter or battery is poor
connected with battery plate
◆
The power use is self-made,
polarity connect inversely
Check " Power Supply " reconnect
● Image/color display abnormal
Fault cause and solve
◆
Video cable poor contact
Change video cable, try again
◆
YPbPr input interface input the
wrong signals.
Check the signal input interface to make
sure it is the right signal.
◆
Video signal interfered from
external environment
Move to another environment to try again
◆
Menu color saturation adjustment
closing
Enter menu to check color, or reset to
factory settings
◆
Check Field in monochrome or gray Reset Check Field back to the color
◆
Image deformation
Reset the ratio
