4
Make sure that you do not place any magnetic parts (e.g. magnetic phone cover) in
the immediate vicinity of the control unit which is in the pocket of the belt.
Otherwise compass-related false readings may occur during navigation.
Turn on the belt with the ON/OFF button on the belt pocket. Press the button for
about 1 second.
After switching on, each of the tactile units in the belt is activated one after the
other, so that the vibration signal moves twice clockwise around the body axis. The
belt is automatically in ready mode. The ready mode is signalled by a short vibration
on the sides of the body, which is repeated at intervals of about 4 seconds.
Now
you can use the buttons on the belt to set various functions (see section
"Functions"), or you can establish a Bluetooth connection to your smartphone and
use the naviBelt in conjunction with the app (see section "Use with the feelSpace
app", page 6).
Functions
You can use the 4 buttons on the pocket of the naviBelt to call up various functions.
The buttons can be felt and pressed through the fabric
Function
Button
Switch on
Press this button for about 1 second to turn on the belt. When
switched on, it vibrates continuously left and right for a short
time, then each vibration unit is activated clockwise one after the
other. The signal travels twice around the body. The naviBelt is
then in ready mode, which is indicated by a recurring vibration
pulse on the sides.
Switch off
Press this button for 1 second to turn off the belt. When
switching off, 4 units vibrate simultaneously (front, rear, sides)
with decreasing intensity until the belt is completely off.
