Feellife Air Flow 1, Instructions For Use Manual

Page: 12 / 73

• Keep the device in the environment that is dry and clean to avoid
pollution.
• For regular use, follow one of the below disinfecting protocols
every 1 to 2 weeks:
1) Household Bleach Disinfection Protocol
Add the household bleach disinfection protocol into the water
storage tank and then run the solution out through the machine until
the solution is used up.
Fill with fresh water and run three to four full cycles, or until the
solution no longer has the bleach smell.
12
Caution:
Do not use high concentration bleach to disinfect as this will
damage rinsing nozzle.
2) Vinegar Disinfection Protocol
Immerse the rinsing nozzle in solution that is consist of 1 part white
vinegar and 3 parts hot water and soak for 30 minutes. And then fill
with fresh water to run three or four cycles to remove the vinegar
smell. Dry all parts completely.
3) Hydrogen Peroxide cleaning protocol
Immerse the rinsing nozzle in solution that is consist of 1 part
hydrogen peroxide and 3 parts hot water and soak for 30 minutes.
And then fill with fresh water to run three or four cycles to remove
the smell. Dry all parts completely.
Ⅵ . Notice
1. Please keep the device in a clean and dry place. Cotton, dust,
etc. may cause the Rinsing Nozzle and Tubing to be clogged and
Caution:
a.The equipment waterproof classification is IP22, the main unit
can’t be washed by flowing water so as to prevent the ingress of
water.
b. The disinfectant residues should be cleaned thoroughly to assure
safe use next time.