TECHNICAL CHANGES RESERVED
Feed Mill Services & Equipment BV
– Tel. +31 (0)493 310 059 – www.feedmillservices.eu
- 18 -
8. EC-DECLARATION OF CONFORMITY
This Declaration of conformity and the CE marking on the type plate are valid for the workbench with
hydraulic press which is part of the Feed Mill Services & Equipment BV delivery. When this workbench
is built into a larger system, the manufacturer of this system (this can also be the operator) must carry
out the conformity review process for this large system according to machinery Directive 2006/42/EC,
the Declaration of Conformity and provide the system with the CE marking.
We
Feed Mill Services & Equipment BV
Dr. Van Doorneweg 38
5753 PM DEURNE
The Netherlands
Declaring that workbench with hydraulic press FME-WBHP-2300,
In accordance with the EU Directives:
-
“Machines” 2006/42/EC
-
“Low voltage directive” 2006/95/EC
-
“EMC directive” 2004/108/EC
Is designed and manufactured to the following standards:
- NEN-EN-ISO 12100-1/-2
Safety of Machinery
– General Design Principles, Part 1 and 2
- NEN-EN-ISO 13857
Safety of Machinery
– Safety distances to prevent hazard zones being
reached by upper and lower limbs
- NEN-EN 349+A1
Safety of Machinery
– Minimum gaps to avoid crushing of parts of the
human body
- NEN-EN 982
Safety requirements for fluid power systems and their components -
Hydraulics
- NEN-EN 13849-1
Safety of machinery
– Safety-related parts of control systems
- NEN-EN 14121
Safety of machinery
– Risk assessment
- NEN-EN 60204-1
Safety of machinery
– Electrical equipment of machines – Part 1
General requirements
Manufacturer
Mr. Frank Voss
Managing Director
