1. Guideline for safe use
Warning
This product is a regular child restraint which is suitable for designated standard form of vehicle seat.
However, there are some vehicle belts with which child car seat is unable to be securely fastened, in
which case the product should not be used. Unstable fitting may cause life-threatening injury as a
result of unstable child restraint and insufficient effect in case of collision or sharp braking. For further
questions for clarification, please ask the shop where you purchased the product or our customer
service hotline.
4. Cautions
Warning
Make sure that the child is with the protector when child is in the vehicle. Do not leave the vehicle
with the child placed on the child seat. Temperature gets very high inside the vehicle in the summer
or by hot weather, which may cause death to the child left in the vehicle.
Do not use the child restraint that has been subject to violent stress in an accident. This may be
ineffective and risky in case of emergency. Make sure of using the new product.
Child restraint should be firmly fastened at all times for safety purpose even when the child is not
placed, otherwise the child seat may be moved by collision or sharp braking that may cause
unexpected accident. Also, do not stack objects on the child car seat.
Do not install the product on the front seat of vehicle with two or three doors or on the seat that may
hinder entranc to the rear seat of the vehicle, if rear seat is used for passenger(s) Installation of these
cases may obstruct emergency evacuation and cause danger.
Vehicle safety belt and the harness belt should be kept undamaged in order to be fully effective in case
of an accident. Any damaged belt should not be used and should be replaced with new belt.
Do not unfasten the buckle when a infant is placed on the restraint, otherwise the infant may be put to
danger of having life-threatening injury in case of an accident.
Care needs to be taken in order for the child not to unfasten the belt or come out of the belt by mistakenly
pressing the buckle button of the vehicle safety belt or harness, otherwise life-threatening injury may
occur in case of an accident.
Direct sunlight to the product may cause a burn by touching the metal or plastic part of the product.
Check and make sure that the metal or plastic part of the product is not hot before using.
Do not adjust the child restraint while driving, otherwise it hinders safe driving and could cause unexpected
accident.
Installation of the product on the passenger seat may hinder operating speed gear or hand brake.
In this case, install the product in the rear seat.
Do not let the child standing, bending back or sitting on its knees in the child seat while driving or stopping,
otherwise child will be xposed to danger of getting injured by falling from child seat.
When the product is fastened by the vehicle safety belt, child seat may become unstable because of the
loosened vehicle safety belt while in use. Therefore, routine check is required and install again in case the
vehicle safety belt is loosened. Using the child seat with loosened vehicle belt may be ineffective and cause
danger in case of an accident.
(Checking and installation should be done in a safe condition)
Summary of Contents for C2
Page 1: ...Instruction manual ...
