Removing Case from Shipping Skid
Move the case as near as possible to the final location before removing it from the
shipping skid.
Remove the eight (8) screws that secure the case to the skid.
Removing Packaging Material
Remove the brackets that held the case to the shipping skid.
Remove the shipping tape that secures the doors and lift-up glass. If it is necessary to
remove tape residue from plastic materials, use cleaning compounds recommended in
the cleaning section of this manual.
Leveling the Case
The case must be level for proper drainage of the tub.
Four (4) leg levelers are provided for leveling the case. The leg levelers can be turned
in, and the case can be placed with the base frame on the floor.
The leveled case
must
be sealed to the floor using and NSF Listed Sealant.
Grill Removal
There is one (1) removable panel on the back of the case. The panel allows access to
the field wiring connection box. Remove this panel to make field-wiring connections.
Drain
The case is supplied with a 1” male NPT drain fitting that can be used for a
connection to a drain.
Humidity System
A water line must be connected to the unit in order for the automatic-fill humidity system to
function. The water line has a 1/4” SAE flare fitting for connection to a water supply. A
water filter is highly recommended to reduce lime deposits in water
Market Deli Heated Cases
Page 4
CAUTION
:
Do not push against the curved glass, end glass, doors, or
doorframes when removing the case from the skid or moving
the case. Case damage or glass breakage could result.
DANGER: Electrical shock hazard. Do not operate unit with
panels removed.
