IMSS E3265
- 6 -
.
Standard Base Electrical Connection:
There are (2) different styles of
electrical box connections as shown in pictures below. The electrical connection box is
in the base for floor electrical connection. The box is accessible by removing the base
panel. See “Panel Removal Section” of this manual for panel removal instructions.
Remove electrical box cover to access
electrical connection.
Optional Top Electrical Connection:
The electrical connection box is
accessible on the top of the case for ceiling drop electrical connection. Remove
electrical box cover to access electrical connection.
Cord Connected (OPTION)
-A factory installed optional power cord is properly sized to the amperage requirements
of the case. See the electrical data plate located on the rear exterior of the case for the
proper circuit size for each case.
- The cord is factory installed protruding from the corner of the case.
-A separate circuit for each display case is required to prevent other appliances on the
same circuit from overloading the circuit and causing malfunction.
CAUTION
Risk of Electric Shock. If the cord or plug becomes damaged,
replace only with a cord and plug of the same type".
PERMANENT
CONNECTION
TERMINAL
BLOCK
OR WIRE
PERMANENT
CONNECTION
ELECTRICAL
BOX COVER
PERMANENT
CONNECTION
ELECTRICAL
BOX COVER
PERMANENT
CONNECTION
WIRES
