Light Replacement
The light fixtures use a spring loaded socket on one end. To remove a light, push the bulb
toward the spring-loaded socket until the opposite end drops out of the socket.
The bulbs are furnished with plastic safety light shields. Make certain the light shields are
always in place to safeguard against bulb breakage.
When replacing lights, use direct equivalents to the original bulbs.
Tilt-Out Front Glass
The front glass tilts out for easy cleaning of the case interior and inner glass pane. Two
cables at the top corners hold the glass in the open position.
Doors
The doors can be removed by lifting the door up until the bottom clears the bottom track.
Clean the door track frequently for easy door operation. A very light film of lubricant, such as
PAM, will help the doors slide easily.
Placing Product into Case
Do not overhang glass shelves with product or display trays. Overhanging the shelves will
block the air flow and could cause product loss.
Do not block the slots along the front air grill or along the display deck backs.
Rear Storage Area
Looking at the back of the case, there is a lockable refrigerated storage compartment in the
lower right corner. The door swings down when opened. The storage door should always be
closed tightly to ensure proper operation of the display case.
CAUTION:
Do not push the front glass to close it. Always hold onto
the top edge when closing the front glass.
Summary of Contents for FCC-4
Page 16: ...WIRING DIAGRAM FCC 4 FCC 5...
