Page 4
SECTION IV- PUBLIC ADDRESS KITS
For Models 80KM & 180K
OPTIONAL PA KIT
1. Models 80KM & 180K are shipped with cable
assemblies having four wires (Yellow, Gray, Green
& Purple) intended for connection of public address
kit.
2. One PA kit is available (UPA1).
OPERATION
1.
“PA”
kit requires no switching. PA announcements are
made by pressing the microphone button and talking. Siren
sounds are stopped until mic button is released.
INSTALLATION
1. Locate area for jack installation. Allow 1”
diameter clearance space for back portion of
jack. Drill 3/8” diameter mounting hole.
2. Un-plug Yellow and Gray wires in 12-pin
connector cable. Extend wires as needed and
connect with wires of same colors coming
from jack.
3. Connect Black ground wire from jack to
vehicle chassis(-).
4. Plug microphone into jack.
5. Adjust gain potentiometer for desired output.
