![background image](http://html1.mh-extra.com/html/federal-signal-corporation/ss2000-plus/ss2000-plus_installation-and-operation-manual_3827536031.webp)
31
Using the S Software
Installation and Operation Manual
Network Settings
The following shows the Network Settings Frame group box of the General Configuration
tab. The Network Settings group box allow you to configure how the connects
to an Ethernet network.
Field
Description
Enable Ethernet Communications Check to enable this group box settings.
Obtain IP Address Automatically Click to negotiate with the network for an IP address
when it is connected.
Use the following IP Address
Click for the to configure itself with the IP
Address, Subnet Mask, and Default Gateway. Obtain
from the system administrator. These are needed
when RealPort drivers are installed any PC running
Commander.
SmartMsg Server IP
Enter the Server IP. Assigned by the system
administrator.
SmartMsg TCP Port
Enter the TCP Port. (The default is 16887.) Assigned by
the system administrator.
Location
Enter the location of the . Assigned by the
system administrator.