7
Installation and Maintenance Instructions
Spire
™
200 Beacon
Federal Signal www.fedsig.com
Overview of the Spire
™
200 Beacon
The beacon uses an LED light source to provide a reliable
signal with 25 selectable flash patterns. The beacon may be
flush mounted, pipe mounted, or attached to brackets. Optional
plastic or aluminum mounting flanges are available. The light
can also be ordered with magnetic mounts or magnetic suction
mounts. The light can operate on a nominal 12 or 24 Vdc power
source. A five-conductor cable protrudes from the base. This
beacon features FSLink™. It can be synchronized with up to
three other FSLink products. Optional branch guards and dust
covers are also available.
Table 1 Product Specifications
Input Voltage 11 to 28 Vdc
12.8 or 25.6 Vdc nominal at 1.25 A
Fuse
2.0 A
Height
Tall beacon:
7.10 inches (18.034 cm) with flange
6.15 inches (15.621 cm) tall without flange
Short beacon:
5.60 inches (14.224 cm) with flange
4.65 inches (14.351 cm) without flange
Diameter
6.54 in with flange
5.22 in without flange
Weight
0.75-2.0 lb (0.34-0.91 kg)
Approvals
Marked on product
Unpacking the Beacon
After unpacking the beacon, inspect it for damage that
may have occurred in transit. If there is damage, file a claim
immediately with the carrier, stating the extent of damage.
Carefully check all envelopes, shipping labels, and tags before
removing or destroying them. If installing a permanent mounted
beacon, ensure that the parts listed in Table 2 are included in
the package.
