16
Installation and Maintenance Manual
LP800 Solaris Beacon
Federal Signal
www.fedsig.com
Selecting a Flash Pattern
Selecting a flash pattern is optional and should be done during
installation. The flash pattern is advanced by momentarily touching
the green wire to positive voltage. See Table 3 for a list of flash
patterns. Once you have selected the flash pattern, connect the
green wire to an on/off switch to use the cruise feature of the
beacon or to cut and insulate to ensure it does not make unwanted
contact with the vehicle.
Table 3 Flash Patterns
Number
Flash Pattern
1
Medium Single
2
Fast Single
3
Single
4
4 x single/ 2 x quad
5
7 x strobe
6
Chopped double
7
Double
8
Fast double
9
Triple
10
Fast Triple
11
Pulsing double
12
Quad
13
Pulsing quad
14
5 x
15
Test (steady)
Maintaining the Beacon
Frequently inspect the beacon to ensure that it is securing attached
to the vehicle and operates properly. Clean the beacon with a mild
soap and a soft rag.
