13
Installation and Maintenance Manual
LP800 Solaris Beacon
Federal Signal
www.fedsig.com
Figure 4 LP800-BASE Kit Contents
Wiring the Mounted Beacon
REVERSE POLARITY/MISWIRING: Reverse polarity may damage the
siren amplifier. To avoid damage to the siren/amplifier, ensure that
the battery voltage is the same voltage as the rating of the light and
that the correct polarity is observed.
Wiring the Single Beacon
To wire the single beacon:
1.
See Figure 5. Connect the red, white, green, and pink
conductors as required. “Table 2 Wire Functions” on
page 15 details the function of each conductor.
2.
Connect the brown wire from the beacon to a known good
vehicle ground as close to the beacon as possible.
