6
Unpacking the Light
Model QL73LEDSCENE
Federal Signal
www.fedsig.com
Unpacking the Light
After unpacking the light, inspect it for damage that may have
occurred in transit. If it has been damaged, do not attempt to install
or operate it. File a claim immediately with the carrier, stating the
extent of damage. Carefully check all envelopes, shipping labels,
and tags before removing or destroying them. Ensure that the parts
listed in Table 1 are included in the package. If you are missing any
parts, contact Customer Support at 18002643578, 7 a.m. to 5
p.m., Monday through Friday (CT).
Table 1 Kit contents
Qty. Description
Part Number
4
#6x1-1/2-inch Stainless Steel Screw
7011205-24
4
Screw Grommet
7065073
Precautions for Installing the Light
To avoid damaging the scene light:
• When installing the QuadraFlare scene light on a vehicle,
you MUST use the manufacturer’s supplied mounting gasket,
screws, and screw grommets.
• Do not use an impact drill or an electric screw gun when
installing the light.
• Torque the mounting screws to the manufacturer’s
recommended specification of 12 inlb +/10 percent.
Failure to observe these precautions will damage the scene light
and void any warranty claims for the light.
