4
Safety Messages to Installers
Model QL73LEDSCENE
Federal Signal
www.fedsig.com
Safety Messages to Installers
People’s lives depend on your safe installation of our products. It is
important to read, understand, and follow all instructions shipped
with the products. Listed below are some other important safety
instructions and precautions you should follow:
• To properly install this light, you must have a good
understanding of automotive electrical procedures and systems,
along with proficiency in the installation and use
of safety warning equipment.
• DO NOT install equipment or route wiring or cord in the
deployment path of an airbag.
• If a vehicle seat is temporarily removed, verify with the vehicle
manufacturer if the seat needs to be recalibrated for proper
airbag deployment.
• When drilling into a vehicle structure, ensure that both sides of
the surface are clear of anything that could be damaged.
• Locate the light control so the VEHICLE and CONTROL can be
oper ated safely under all driving conditions.
• Do not attempt to activate or deactivate light control while driv
ing in a hazardous situation.
• This product contains high intensity LED devices. To prevent
eye damage, DO NOT stare into the light at close range.
• After testing is complete, provide a copy of these instructions to
the instructional staff and all operating personnel.
• Frequently inspect the light to ensure that it is operating
properly and that it is securely attached to the vehicle.
• File these instructions in a safe place and refer to them when
maintaining and/or reinstalling the product.
Failure to follow all safety precautions and instructions may result
in property damage, serious injury, or death.
