2
Safety Messages to Installation and Service Personnel
of Federal Signal Products
Peoples lives depend on your proper installation of our products. It is important to follow all instructions
shipped with the products. The selection of the mounting location for the device, its controls and routing of the
wiring is to be accomplished under the direction of the Facilities Engineer and the Safety Engineer. In addition,
listed below are some other important safety instructions and precautions you should follow:
•
This unit must be installed by a qualified electrician in accordance with the National Electrical Code/
NFPA 70/NFPA 72/ANSI and with all local codes and authorities having jurisdiction.
•
Read and understand all instructions before installing or operating this equipment.
•
Consult the authority having jurisdiction in your area regarding the proper use and installation of this
product.
•
Do not connect this product to the system when power is on.
•
After installation and completion of the initial system test, a program for periodic testing of this product
must be established. Refer to NFPA 72G, local Fire Codes and the authority having jurisdiction for this
information.
•
Show these instructions to your Safety Engineer and then file them in a safe place and refer to them
when maintaining and/or reinstalling the unit.
Failure to follow all safety precautions and instructions may result in property damage, serious injury, or death.
