30
GENII-RA700 Remote Amplifier
PAGASYS GEN II Remote Amplifier and Controller (GENII-RC and GENII-RA700)
Federal Signal
www.fedsig.com
The network audio connections must be mapped in Dante® Controller as follows:
Controller scope GENII-RA700 scope Controller
Dante output
GENII-RA700
Dante input
A-master
shared
13
1
A-master
shared
14
2
A-master
shared
15
n/c
A-master
shared
16
n/c
B-standby
shared
13
3
B-standby
shared
14
4
B-standby
shared
15
n/c
B-standby
shared
16
n/c
Where n/c means no connection.
4.5.1.1.3 Duplicated System
In a duplicated system, there are two controllers, one with scope A-master and the other
with scope B-standby. Each has its own amplifiers and I/O boards (that is, each amplifier
or I/O board is scoped either A-master or B-standby).
Because each controller has its own amplifiers, a given GENII-RA700 will be connected to
either the A-master controller or the B-standby controller in the PAGASYS configuration,
and the Dante® network audio connections will be established accordingly in Dante®
Controller.
The network audio connections must be mapped in Dante® Controller as follows:
Controller scope
GENII-RA700 scope Controller
Dante output
GENII-RA700
Dante input
A-master
A-master
13
1
A-master
A-master
14
2
A-master
A-master
15
3
A-master
A-master
16
4
A-master
B-standby
13
n/c
A-master
B-standby
14
n/c
A-master
B-standby
15
n/c
A-master
B-standby
16
n/c
B-standby
A-master
13
n/c
B-standby
A-master
14
n/c
B-standby
A-master
15
n/c
B-standby
A-master
16
n/c
B-standby
B-standby
13
1
B-standby
B-standby
14
2
B-standby
B-standby
15
3
B-standby
B-standby
16
4
Where n/c means no connection.
